Posts

Showing posts with the label Battery Minder

Flywheels, Pressure Plates and Clutches

Image
             Every engine on the starting grid is connected to a transmission. This connection usually consists of some sort of clutch mechanism. This clutch mechanism in your car has two basic functions. First, it has to be able to momentarily disengage the engine from the transmission for gear changes and to stop the car. Next, it has to be able to transfer maximum engine torque without slipping when it is engaged. Sounds pretty simple. The problem is with all of the details. The Flywheel             Let’s start with the flywheel. This is the disc that’s bolted to the end of your crankshaft. A flywheel can be made out of iron; steel or aluminum and it can come in a variety of diameters and weights. The flywheel has three main purposes.             The primary purpose of the flywheel is to store kinetic energy and maintain the revolving inerti...

Driveshafts

Image
If you break a driveshaft your car stops. The strongest engine, or the most sophisticated suspension, will not overcome a driveshaft failure. If you break a driveshaft you’re going home. A few of us may carry extra U-joints in the trailer but very few of us have extra driveshafts at the track. Driveshaft Loops and Safety Most race groups require some sort of driveshaft safety loop to prevent a broken driveshaft from injuring the driver. This is not the place to skimp on material or do the minimum you can get away with. The driveshaft loop should be substantial enough in thickness and mounting to contain the wild gyrations of the broken shaft and protect the adjoining flooring. While driveshaft failures are rare they can be catastrophic even if the car doesn't crash. 
The driveshaft loop must be placed in a location that allows it to restrain the shaft yet at the same time allow for the easy removal of the shaft. A two-piece bolt-together loop can make driveshaft removal much ...