Posts

Showing posts with the label Homested

Driveshafts

Image
If you break a driveshaft your car stops. The strongest engine, or the most sophisticated suspension, will not overcome a driveshaft failure. If you break a driveshaft you’re going home. A few of us may carry extra U-joints in the trailer but very few of us have extra driveshafts at the track. Driveshaft Loops and Safety Most race groups require some sort of driveshaft safety loop to prevent a broken driveshaft from injuring the driver. This is not the place to skimp on material or do the minimum you can get away with. The driveshaft loop should be substantial enough in thickness and mounting to contain the wild gyrations of the broken shaft and protect the adjoining flooring. While driveshaft failures are rare they can be catastrophic even if the car doesn't crash. 
The driveshaft loop must be placed in a location that allows it to restrain the shaft yet at the same time allow for the easy removal of the shaft. A two-piece bolt-together loop can make driveshaft removal much ...

Lug Nuts and Studs

Image
The single greatest concern with lug nuts is that you have adequate engagement between the lug nuts and wheel studs. The picture on the left is what you shouldn' t have. Notice how the studs don't stick out past the lug nuts. These wheels studs are  too short. The engagement between the nut and stud is marginal. The general rule is that the number of engaged threads should equal the diameter of the wheel stud. In other words if your wheel stud 12mm in diameter than the lug nut should engage at least 12mm of thread.  The Southern California Timing Association, which governs the racing at Bonneville, requires at least 5/8 inch of thread engagement.  The SCTA also prohibits the use of closed-end lug nuts.  This Mustang is an example of closed lug nuts. We simply don't have a clue about what's going on with closed lug nuts. It's difficult to see how many threads are engaged. The worst case scenario is where the wheel stud bottoms out on the inside of the lug nut and...