Posts

Showing posts with the label Wilwood

Brake Rotors - Part 2

Image
Rotor Preparation No one talks about brake rotor prep, but it's a really big deal. You can't just take a brand new rotor out of the box and throw it at the car. Even worse is to take a used brake rotor and install new brake pads without any rotor preparation. This is just asking for trouble. You run a huge risk of brake squeal, and you're not getting the maximum effectiveness out of the new brake pads.   Most suppliers of bench lathes and on-car lathes say sanding after turning isn't necessary as long as proper feed rates and sharp lathe bits are used. The finish should be within specifications and cause no problems.  Proponents of sanding claim that sanding improves the finish by making rotors smoother. Sanding knocks off the sharp peaks as well as torn and folded metal left on the surface by the lathe bits. Sanding may improve the surface finish 2 to 5 microinches. This will give you better pedal feel, quicker pad seating, and improved overall brake performance. I san...