Posts

Showing posts with the label Corvette Porsche

Crankshafts

Image
Your crankshaft goes from 0 to 3000 rpm in about two seconds. When the air fuel mixture expands in the cylinder head it forces the piston and connecting rod down into the crankshaft. At 8,000 rpm it does this 4,000 times a minute. The  crankshaft only appears to be rigid. It isn't. Anytime a load is applied to a part the part deflects. All  parts ultimately act as a spring in response to a load. In the case of the crankshaft that movement will be very small but it will be intense. It will also happen very quickly. When the engineers designed your engine they did a lot of calculations and they created a crankshaft that could withstand all of these forces. Now decades later you’re changing everything. You’re trying to get more horsepower out of your old engine, which blows up all those original calculations. You’re applying a lot more stress than the designer ever envisioned. And, you’re asking a fifty-year old part to do this. Maintenance Schedule: Tom Lieb, founder of Scat Cra...

Trailer Lug Nuts

Image
You don't want a wheel falling off your trailer. That could be one very bad day. Besides a wheel bearing failure you could easily have the lug nuts loosen. The next thing you know the trailer wheel passes you as you go down the road.  The torque setting for your trailers wheels is generally greater than it is for your car or truck. Plus the trailer nuts loosen easily. On your car or truck the wheels actually turn as you go around a corner. OK - at least the front ones turn. Your trailer wheels are fixed in place. This means that when you go around a corner the wheels actually flex. This loosens the lug nuts, for bolts.  You can't just tighten the lug nuts with a bigger wrench because you might break the wheel stud. That's an even bigger problem. The solution is to tighten them correctly and do it several times.  People say you should do it until the nuts actually stabilize. I'm suggesting that you do it after 50, 150 and again at 300 miles. You should be fine then until...